 |
Case Studies (Industrial & Commercial) Wilson Energy Limited, has undertaken various projects, please see below individual case studies:- | |
 |
Case Studies (Domestic) Wilson Energy Limited, has undertaken various projects, please see below a selection of case studies:- |
|
|
County Square Shopping Center A recent new developement and an extension to an existing shopping center has involved WilSon Energy in providing a turnkey project for metering, automated data collection and tennant billing. Water sub-meters (billing standard) have been installed for each retail customer and also the landlords areas, together with a wireless data collection network, which allows remote data to be gathered for energy and water consumption which is then made available on WilSon energy's on-line energy management system. A Tennant billing feature allows the Center's management company to bill each customer for their water useage.
The company has just been awarded a second phase of the project to become the center's energy management partner. This will involve a staged approach starting with the installation of utility sub-metering across the original developement in all of the landlords areas. This will allow energy analysis to be undertaken and bench marking to be set. We will also be providing the building energy performanve certificates.
The heat is on!
One of Nottingham’s newest developments has benefitted from the installation of heat energy meters, supplied, installed and commissioned by Wilson Energy’s metering division, L2 Metering Services.
In-line Ultrasonic heat energy meters are monitoring the LTHW heating system within building and are used for the apportionment of energy costs.
Each system comprised of hot water flow part, flow and return temperature sensors and wall mounted electronic integration unit.
Care Homes Care Homes have been carrying out a series of studies around their care homes across the UK, looking at initiatives for sustainable green power solutions. The project was to understand the pattern and volume of consumption of hot water on site to enable a business case to be produced in support of purchasing Solar Heating technology.
This would involve replacing the conventional heat exchanger system with a newly designed solar powered heating system, which required an effective metering and data collection system.
L2 Metering Services, a division of; Wilson Energy Limited was involved with providing a solution of metering hardware to monitor the consumption of the mains water supplies, collecting data through a GSM operated data logging system and making available the information on line, through a suitable Web portal.
We visited site, provided a costed specification and then undertook the work, ultimately providing a system that now enables the Care Home to view consumption data online. This included commissioning of the complete system by our engineer.
|
St Williams Yard - London N1

Is a new residential development within a stones throw of Kings Cross, consisting of 154, one, two and three bedroom apartments, which a number of are social housing.
Each apartment has a Danfoss/Redan Hydraulic Interface unit installed, for heating and domestic hot water, incorporated into the units are Sonometer 1000 in-line ultrasonic heat energy meters with MBus communication module.
L2 Metering Services designed a star wiring network, through a series of cascade units and finally linked to a MBus master control unit all of which was installed by the on-site electrical contractor. (Although L2 can also provide this service).
A dedicated local PC sits on site which is the hub of the automatic data collection network. Each meter is individually addressed so information is transfered at regular intervals, with all of the essential consumption data. Information will be exported for off-site billing.
L2 Metering Services engineers commissioned and sealed each energy meter, (essential for billing standard meters) and carried out phased commisioning of the total scheme.
The Sawmill - Hull

The Sawmill apartments consist of 48 luxury dwellings sited in Hull city centre. The development is situated on the site of the former Danby’s Plumbers Merchants. A six storey timber framed building, clad with various cladding systems and glazed curtain walling, consists of 19 one bedroom and 29 two bedroom apartments.
The utility infrastructure for this building is a private network, where the Landlord is billed by the utility companies; through bulk meters. L2 Metering Solutions have been commissioned to supply a complete infrastructure for this site covering metering hardware, data collection and billing.
Metering hardware has been provided to monitor the incoming cold water supply and heat energy meters to monitor energy usage to each individual apartment. The heat meters will be installed into each consumer unit heat control station within the dwelling itself.
A MBus twisted pair data collection system with data concentrators have been supplied to the main contractor and installation carried out as directed by L2 Metering. Each MBus master unit then communicates data from each individual addressable meter via a PC which is ultimately collected by the MBus software. CSV files are then exported automatically into Wilson Energy’s own billing software, which will operated by the client, following commissioning of the system by our engineers and training of the clients relevant personnel.
|